« previous next »
Pages: 1 [2]

Author Topic: Recurve designs  (Read 7517 times)

0 Members and 4 Guests are viewing this topic.

nickf

  • Guest
Re: Recurve designs
« Reply #15 on: September 28, 2009, 03:34:12 pm »
I made this bbi recurve recently. 2 ipé lams, wich are really thin (like 1/8") will take the bend without breaking. My lams were a little thicker, so I glued a less-severe recurve in it, and when it was finished I had sanded away almost one whole lam. 2 lams, tapering from 3/16" to 1/8" would be ideal, and with a thin boo backing it would be ready to string once it comes off the form.

 

Nick
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Recurve designs
« Reply #16 on: September 28, 2009, 04:37:41 pm »
Your dry southern Arizona climate is great for hickory, and hickory bends pretty easy. Just a thought.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline bcbull

  • Member
  • Posts: 541
Re: Recurve designs
« Reply #17 on: September 28, 2009, 04:46:13 pm »
Nate get ur self a copy of the new permtive archer marc st louis  just wrote a good deal about his static recurves   kind a  a bulid along   lot s of good info right there  Brock
Logged
Pages: 1 [2]
« previous next »