« previous next »
Pages: [1]

Author Topic: finish question  (Read 1515 times)

0 Members and 1 Guest are viewing this topic.

Offline wvbowhntr

  • Member
  • Posts: 129
finish question
« on: September 23, 2009, 10:08:53 pm »
I am making a sinew backed osage with copperhead skins.  I know most people use tru oil, but can you use other finishes over the skins?  I have minwax wipe on poly would that work over snake skins?
Logged
As for me and my house we will serve The Lord.  Greg in WV

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: finish question
« Reply #1 on: September 23, 2009, 10:55:21 pm »
Any finish you would use on a bow will work over skins. I've never used wipe on poly but I'm sure it would be fine to use. Be sure all of the scales are off of the skin before you add the finish.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mack

  • Member
  • Posts: 37
Re: finish question
« Reply #2 on: September 23, 2009, 11:50:01 pm »
Pat's right on about getting the scales off, any left under your poly finish will turn a grey milky color when it dries. 
Sponge at it with a piece of masking tape works good, any tough ones flick off with your finger. I've used regular minwax poly applied with a sponge brush over snake skins, no problems.

mack
Logged
NW Alabama

mack
Pages: [1]
« previous next »