« previous next »
Pages: [1]

Author Topic: centerlin tool  (Read 4595 times)

0 Members and 1 Guest are viewing this topic.

Offline luke the drifter

  • Member
  • Posts: 171
centerlin tool
« on: September 06, 2009, 08:52:19 pm »
hello to all of you,

i do not which of these archery sites that i saw this tool.  it is a centerline tool for finding the center of staves.  i thought it was an ingeniuous(?) tool for this purpose.  it is a 5 inch piece of wood with two dowels maybe a half-inch from the ends and a 5/16 nut fitted in the very center of the wood and you put a pencil in the nut only so far.  you put the stave between the dowels and fun it up the stave as you make a mark.  has anyone seen such a animal?  if so,  i would look a picture so i can make one from it.

Logged

Offline Dano

  • Member
  • Posts: 1,349
Re: centerlin tool
« Reply #1 on: September 06, 2009, 08:59:41 pm »
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline luke the drifter

  • Member
  • Posts: 171
Re: centerlin tool
« Reply #2 on: September 06, 2009, 10:49:33 pm »
thank you for the information.  i thought i was right or close enough on its dimensions.

Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: centerlin tool
« Reply #3 on: September 06, 2009, 11:03:55 pm »
When laying out a bow you have to follow the vertical or lateral grain. How can you do that with this tool?
http://georgeandjoni.home.comcast.net/~georgeandjoni/layout.html
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline sailordad

  • Member
  • Posts: 5,045
Re: centerlin tool
« Reply #4 on: September 06, 2009, 11:25:16 pm »
Quote from: George Tsoukalas on September 06, 2009, 11:03:55 pm
When laying out a bow you have to follow the vertical or lateral grain. How can you do that with this tool?
http://georgeandjoni.home.comcast.net/~georgeandjoni/layout.html
Jawge

yup,what he said
unless your fortunite enough to have the rarely seen perfect staves   lol
although it is a cool idea,i just dont see it being very practicle for making selfbows
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: centerlin tool
« Reply #5 on: September 06, 2009, 11:36:01 pm »
This is one I made. I gave it to Pappy at the Classic last may. I used it quite a bit and it works great on selfbow staves. If the stave is split out along the grain it will follow the grain fairly well and if any areas are questionable I would make two lines, one from one side and one from the other and then mark the center between the two. I haven't built a bow since then so I haven't missed it but I will make another.





Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sailordad

  • Member
  • Posts: 5,045
Re: centerlin tool
« Reply #6 on: September 06, 2009, 11:46:32 pm »
ya your right there pappy
i didnt even think of that,the split should follow the grain,therfore the tool should still go down the center line
very cool,i think i might have to try this tool out :)
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: centerlin tool
« Reply #7 on: September 06, 2009, 11:50:01 pm »
Pappy....man you better hope that Mark  Baggett (Pappy) don't read this Tim....he might go all the way to the Twin Cities to Hunt You Down for calling Pat....Pappy!!!
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: centerlin tool
« Reply #8 on: September 06, 2009, 11:55:26 pm »
Mike, he should be thanking Tim! ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sailordad

  • Member
  • Posts: 5,045
Re: centerlin tool
« Reply #9 on: September 07, 2009, 12:12:38 am »
oops too much wine tonight
i apologize to both of you guys,my bad
time to put the grapes down lol
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: centerlin tool
« Reply #10 on: September 07, 2009, 12:15:19 am »
No need to apologize. We all probably drink too much. Evan Williams told me to say that! ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: centerlin tool
« Reply #11 on: September 07, 2009, 06:41:00 pm »
You guy's ought to be ashamed, drinking like that. ::) :o
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Dano

  • Member
  • Posts: 1,349
Re: centerlin tool
« Reply #12 on: September 07, 2009, 06:48:17 pm »
"No need to apologize. We all probably drink too much. Evan Williams told me to say that!"

Pat, I'm appalled ::)
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: centerlin tool
« Reply #13 on: September 07, 2009, 10:57:34 pm »
OK Mr Lemonade!  ;) ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »