« previous next »
Pages: 1 [2]

Author Topic: Osage selfbow finished  (Read 5490 times)

0 Members and 1 Guest are viewing this topic.

Offline Postman

  • Member
  • Posts: 1,154
Re: Osage selfbow finished
« Reply #15 on: September 01, 2009, 09:21:04 pm »
Getting a short 54# shooter outta that stave? Wow -  Nice work!
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline Keenan

  • Member
  • Posts: 4,824
Re: Osage selfbow finished
« Reply #16 on: September 02, 2009, 11:55:05 am »
Very nice Dan. looks like that would have been a very challenging stave.
Logged

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Re: Osage selfbow finished
« Reply #17 on: September 02, 2009, 12:24:22 pm »
just wondering if any of you have had a stave where the back was concave instead of convex? i'll see if i can take a picture of this bow to show you, it made it a real pain to chase the ring.
Logged
45# at 27"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Osage selfbow finished
« Reply #18 on: September 02, 2009, 12:32:12 pm »
I made an osage selfbow years ago with a convex back. Not only is it difficult to chase a ring but the tillering was a biatch also. You did a nice job on this bow!   8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Re: Osage selfbow finished
« Reply #19 on: September 02, 2009, 12:38:09 pm »
agreed on the tillering part too, when the back is concave you can get away with less wood, but you have to be carful that you keep it even throughout or you might get a really thin spot where the lowest "dip" is.
Logged
45# at 27"
Pages: 1 [2]
« previous next »