« previous next »
Pages: [1]

Author Topic: Pressure Flakers  (Read 2408 times)

0 Members and 1 Guest are viewing this topic.

Offline Staver

  • Member
  • Posts: 164
Pressure Flakers
« on: August 19, 2009, 09:25:01 pm »
I just finished making me some new pressure flakers after work tonight. ;D  I got some 3/4" nylon rod (thanks again Wolf Watcher), drilled em out, put in the set screws and that's all there was to it.  Cost me $14.84 for all 3 flakers 8).  Now I have a 5 1/2", 10", and a 18" Ishi stick.  All can be loaded from either end.  I just had a need to tell everyone :P  Joe H

[attachment deleted by admin]
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: Pressure Flakers
« Reply #1 on: August 19, 2009, 11:46:49 pm »
yup got me one just like that,also got one made of hickory
i like the hickory one better,the other one bends more than i like
but works nice for finish type flaking for me
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Bone pile

  • Member
  • Posts: 1,491
Re: Pressure Flakers
« Reply #2 on: August 20, 2009, 07:54:05 am »
fine looking tools,just add rock
Bone pile
Logged
Venice Florida

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Pressure Flakers
« Reply #3 on: August 20, 2009, 09:10:35 am »
Like em alot
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Pahinh.Winh

  • Guest
Re: Pressure Flakers
« Reply #4 on: August 20, 2009, 12:41:35 pm »
Look like they'll work, but somehow, I think they missed the 'primitive' part.  Nice photos!
Logged

Offline Staver

  • Member
  • Posts: 164
Re: Pressure Flakers
« Reply #5 on: August 20, 2009, 01:55:11 pm »
Thanks everyone.  I know they don't look like my deer tines, but I'd figure I'd give em a try making some Ishi points.  I was psyched that I didn't pay out the wazoo for em! 8)  Joe H
Logged

Offline Wolf Watcher

  • Member
  • Posts: 1,308
Re: Pressure Flakers
« Reply #6 on: August 20, 2009, 09:42:29 pm »
 ::)  Sometimes I get a little confused about the "primitive" when it comes to knapping!!  Copper has been around for many centuries and I have noticed that very few bows come even close to being made with just ABO tools.  I started out primitive as that was all I had to work with, but over the years have used every tool and every means to save precious stones to make stone tools, arrowheads, knifes. etc.  So if that makes me a Primitive traitor, then I guess my evolution has gone backwards!  Pokie
Logged
Get Close---Shoot Straight

Offline madcrow

  • Member
  • Posts: 1,531
  • Swift, Silent, and covered in wood shavings.
Re: Pressure Flakers
« Reply #7 on: August 20, 2009, 09:58:15 pm »
ABO or not, they look great to me.  I like some good copper.
Logged

Offline Staver

  • Member
  • Posts: 164
Re: Pressure Flakers
« Reply #8 on: August 22, 2009, 11:50:28 pm »
Thanks Madcrow ;)  I'm lookin' forward to tryin' em out ;D  Joe
Logged

Offline Jaeger

  • Member
  • Posts: 238
Re: Pressure Flakers
« Reply #9 on: August 23, 2009, 09:23:01 am »
looks just like what you would buy .
Logged
Pages: [1]
« previous next »