« previous next »
Pages: [1] 2

Author Topic: Multi Fletcher  (Read 7213 times)

0 Members and 2 Guests are viewing this topic.

Offline Kegan

  • Member
  • Posts: 2,676
Multi Fletcher
« on: August 16, 2009, 03:18:25 pm »
Lookee at what I made ;D!!!

I have no idea where I got the desire to make this, but I couldn't sleep so I started thinking it out. Went through about six designs and came up with this. So I spent all Saturday afternoon working on it- even though it's very simple. Hardest part was figuring out what sort of scraps I needed. It works pretty well, not perfect (sometimes the front or back are off the shaft slightly at first and you have to be careful about putting them down), but much better than I had ever hoped. I've been using my brother's Bohning jig, but it's been slow on big batches. This jig fletches it almost as well (same helical as the other jig, and they haven't fallen off yet :D). It's just a few scraps of red oak, some screws and glue, and some clamps. Either way, for the price of a nice multi fletcher I think this one is simply great. Once I get used to using this one, I'm sure I won't have any issue. I'm really happy with this :)

I only had two arrows to test it on though. Two are done with this, two are done with my brother's jig. I can't really tell much of a difference, can you?

[attachment deleted by admin]
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Multi Fletcher
« Reply #1 on: August 16, 2009, 04:09:30 pm »
Necessity is the mother of invention! Well done, young feller.
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Multi Fletcher
« Reply #2 on: August 16, 2009, 04:13:40 pm »
Thank you! Apparently insomnia is too :D
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Multi Fletcher
« Reply #3 on: August 16, 2009, 04:46:19 pm »
Cool Kegan. Just like in the old days.  Well done.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Multi Fletcher
« Reply #4 on: August 16, 2009, 05:23:13 pm »
 That's a pretty cool, simple, Idea, Kegan. I like it. :)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Multi Fletcher
« Reply #5 on: August 17, 2009, 01:39:58 am »
A little build-along would be fantastic!
Logged
Frank from Germany...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Multi Fletcher
« Reply #6 on: August 17, 2009, 07:31:06 am »
Very cool,use what you have. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Kegan

  • Member
  • Posts: 2,676
Re: Multi Fletcher
« Reply #7 on: August 17, 2009, 10:32:36 am »
Thanks everyone ;D. As soon as I ind a few more clips I intended to make another one. "Super bulk arrow making". Not that I have enough to make arrows in bulk, but more for the comfort of knowing I could, so I would snap some pictures of it as I built the next one- so yoou read my mind Medicinewheel :D
Logged

Offline Canoe

  • Member
  • Posts: 238
  • Progress - Not Perfection
Re: Multi Fletcher
« Reply #8 on: August 17, 2009, 01:13:16 pm »
Howdy Kegan,

Thanks for sharing your invention.

Couple of questions...

-What are those laths (thin pieces of wood(?)) that are glued(?) to your little clamps?  What are they made of, and how thick are they? (Length and Hight also, please?)

-Is there a twist in those little laths, or are they just offset?  How much (in inches) did you offset those clamp things?

-Can you provide some dimensions to your fixture?

-The Knocks (ends of the arrows) appear to go into little holes.  Are there little slots in the fixture for the arrows to fall into - in front of the fletchings?

-What / Why are those little sticks sticking out of the ends of your clamp things?


I just built my Spine Tester from a PA Build-Along - works great!! 
So, now I can focus on building this fletcher.


Thanks again for sharing,
Canoe
Logged
"Nature is a mutable cloud which is always and never the same."  - R. W. Emerson

"Wilderness is not a luxury, but a necessity of the human spirit."    -Edward Abbey

Offline PeteC

  • Member
  • Posts: 2,014
Re: Multi Fletcher
« Reply #9 on: August 17, 2009, 07:33:51 pm »
That's a neat fletcher Kegan.Good work!!! God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Kegan

  • Member
  • Posts: 2,676
Re: Multi Fletcher
« Reply #10 on: August 18, 2009, 11:21:03 am »
Thanks guys.

Canoe
-the clamps are just made from thin scraps of wood. They vary a bit in thickness, but are about 1/8" thick. They're the biggest I could get from the scrap I had- 1 1/2" high or so, and about 7" long. The little notches on the side are, I believe 3/8" square.

-no twist, just offest. Oddly enough, they look almost identical to a RW feather glued on with an actual jig. I got the offset really simply: I squared the sides of the slots up with the sides of the hole. So in front, the slot is flush with the right side of the arrow, and in the back the slot is  flush with the left side of the arrow.

- about 7" wide,  6 1/2" or so long. It's about 1 1/4" high or so. It would be better it were longer, but that's all the longer I had my clamps.

-No slots. The front end, in front of the fletchings, is just attached with two small snubbed 1 1/4" screws. It only takes three or four turns of a screw driver to take the front off, into which (and out of which) you slide the arrows. COuldn't think of anything better than that at the time :D

- Some of the slots are a bit larger than the clamps, and so I jut shoved some little shims in there to keep them still. Gives me a little wiggle room too.
Logged

Offline Stoker

  • Member
  • Posts: 1,729
Re: Multi Fletcher
« Reply #11 on: August 18, 2009, 02:31:02 pm »
Cool fletcher  Kegan.. If you build another it would make a great article in the PA mag
It would be great I'm sure many would enjoy it.You did a awesome job.
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Kegan

  • Member
  • Posts: 2,676
Re: Multi Fletcher
« Reply #12 on: August 19, 2009, 12:17:20 pm »
Quote from: Stoker on August 18, 2009, 02:31:02 pm
Cool fletcher  Kegan.. If you build another it would make a great article in the PA mag
It would be great I'm sure many would enjoy it.You did a awesome job.
Thanks Leroy

Thanks! Ya think? Hmmm :)...
Logged

AKAPK

  • Guest
Re: Multi Fletcher
« Reply #13 on: August 20, 2009, 02:03:39 am »
Genius and a gentleman :)
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Multi Fletcher
« Reply #14 on: August 20, 2009, 01:31:36 pm »
Quote from: AKAPK on August 20, 2009, 02:03:39 am
Genius and a gentleman :)

Thank you- you're gonna make my head swell ;D!
Logged
Pages: [1] 2
« previous next »