Author Topic: Bending ERC  (Read 2095 times)

0 Members and 1 Guest are viewing this topic.

Offline venisonburger

  • Member
  • Posts: 1,042
Bending ERC
« on: June 25, 2009, 03:30:37 pm »
What method is preferred for ERC bending, I have the ERC I picked up at this years classic but I need to straighten out some twist and add some reflex.
VB

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Bending ERC
« Reply #1 on: June 25, 2009, 06:57:42 pm »
Haven't tried ERC, but if it's anything like the juniper we have around here, then steam is best.  You can steam it when it's dry, but it will check (when it dries out) if left too long in the steam.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Bending ERC
« Reply #2 on: June 25, 2009, 10:46:45 pm »
I think steam would be better. ERC has a low flash point when dry. If you use dry heat it would probably ignite. JMO. You could always cut it till it is flat and back it with some rawhide. It works that way for me.
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Bending ERC
« Reply #3 on: June 26, 2009, 06:39:00 am »
I would probably seal it good before I steamed it,that will probably keep down the checking. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

PeteDavis

  • Guest
Re: Bending ERC
« Reply #4 on: June 26, 2009, 07:49:49 am »
Would ERC make a good bamboo/ERC lam bow?

I might be able to find a few decent boards.

PD

Offline venisonburger

  • Member
  • Posts: 1,042
Re: Bending ERC
« Reply #5 on: June 26, 2009, 04:39:58 pm »
I'm going to back with rawhide once I get it straight. This is my first attempt with this stuff, eager to see what I get.
Thanks for the advice. Guess I'll seal it up and steam it.
VB