« previous next »
Pages: [1]

Author Topic: cresting paints?  (Read 1921 times)

0 Members and 1 Guest are viewing this topic.

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
cresting paints?
« on: June 20, 2009, 09:14:04 pm »
does anybody have any expierience with using oil based paint for cresting? and if so, would a wipe-on poly work for a finish over it? im only going to be doing like a 1/2" stripe, and i have a lot of oil based paints not doing anything.

thanks!
Phil
« Last Edit: June 20, 2009, 11:23:08 pm by The Burnt Hill Archer »
Logged
stalk softly, and carry a bent stick.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: cresting paints?
« Reply #1 on: June 21, 2009, 12:24:39 am »
Oil based paint will work fine for cresting and after it dries, poly over it will be fine.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
Re: cresting paints?
« Reply #2 on: June 21, 2009, 08:36:09 am »
good deal, thanks Pat!
Logged
stalk softly, and carry a bent stick.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: cresting paints?
« Reply #3 on: June 29, 2009, 01:51:36 pm »
Acrylic craft paint works great too, and dries in minutes.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline anglobow

  • Member
  • Posts: 41
Re: cresting paints?
« Reply #4 on: June 29, 2009, 05:57:34 pm »
In my experience, an oil based finish will melt oil based paint, even when fully dry. I've only used model paint though. Acrylic paint with poly or spar urethane is a good combo.
Logged
Pages: [1]
« previous next »