Author Topic: bending yew: wet heat or dry?  (Read 4833 times)

0 Members and 1 Guest are viewing this topic.

radius

  • Guest
bending yew: wet heat or dry?
« on: June 24, 2009, 09:31:35 pm »
i got some yew staves now, and eventually i'll want to recurve some tips...is it safer with yew to use steam or dry heat? 

thanks

Offline burn em up chuck

  • Member
  • Posts: 718
Re: bending yew: wet heat or dry?
« Reply #1 on: June 24, 2009, 10:53:16 pm »
steam, just be careful don't crush the wood when clamping.

                                                 chuck
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline bigcountry

  • Member
  • Posts: 841
Re: bending yew: wet heat or dry?
« Reply #2 on: June 24, 2009, 11:36:47 pm »
i got some yew staves now, and eventually i'll want to recurve some tips...is it safer with yew to use steam or dry heat? 

thanks

I used dry heat with yew.  But I was bending at the handle.  Its so dry anyway.  But recurving tips takes a lot of heat.  Not sure. 
Westminster, MD

Offline adb

  • Member
  • Posts: 5,339
Re: bending yew: wet heat or dry?
« Reply #3 on: June 25, 2009, 01:17:51 am »
Steam.

Offline Gordon

  • Member
  • Posts: 3,299
Re: bending yew: wet heat or dry?
« Reply #4 on: June 25, 2009, 01:27:16 am »
Definitely steam with yew.
Gordon

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
Re: bending yew: wet heat or dry?
« Reply #5 on: June 25, 2009, 03:55:08 am »
i used to steam but i've switched to dry.

build a caul where you can hook the tip in and hang a small weight from the other end.  apply just enough heat to move it the amount you need.   saves alot of time steaming and waiting to lose the excess moisture.

i use steam for bending through the handle to align the tips
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline NOMADIC PIRATE

  • Member
  • Posts: 1,910
Re: bending yew: wet heat or dry?
« Reply #6 on: June 25, 2009, 04:18:59 am »
I had pretty decent results with dry heat by clamping the tips and hanging weights, but you gotta make sure you get the bending done by applying heat to the sides,..... than when the banding as occured fix it by heating the belly, pretty safe this way



NORTH SHORE, HAWAII

radius

  • Guest
Re: bending yew: wet heat or dry?
« Reply #7 on: June 25, 2009, 11:09:10 am »
ok then, thanks everybody!

looks like we have a consensus:  both ways work