Author Topic: What is the best glue for tips? (Read 2938 times)

chep · « **on:** May 12, 2009, 01:08:37 am »

I don't see the poll option. Which is supported by SimpleMachines Forum btw. Mods? This should be a poll.

Krazy Glue
Smooth On
Titebond
Urac 185
Kwik It
Other

Pappy · « **Reply #1 on:** May 12, 2009, 05:48:24 am »

I use TB3.
Pappy

Pat B · « **Reply #2 on:** May 12, 2009, 09:53:57 am »

I use TBIII, super glue or 2ton epoxy. It all depends on the bow wood and the tip material.

bigcountry · « **Reply #3 on:** May 12, 2009, 10:08:05 am »

Not to hijack this thread, can someone confirm that TBIII works well with bone and antler? I have always used plastic weld epoxy. It dries same color as osage. Not had a tip come off. But if TBIII works on both bone and antler, I will try it.

Pappy · « **Reply #4 on:** May 12, 2009, 10:32:07 am »

big, I use it on both without any problems,just be sure the bone is digressed good.

Pappy

chep · « **Reply #5 on:** May 12, 2009, 11:00:33 am »

Quote from: bigcountry on May 12, 2009, 10:08:05 am

Not to hijack this thread, can someone confirm that TBIII works well with bone and antler? I have always used plastic weld epoxy. It dries same color as osage. Not had a tip come off. But if TBIII works on both bone and antler, I will try it.

Not hijacking. That's exactly some of the discussion I would like to see.

TRACY · « **Reply #6 on:** May 12, 2009, 11:32:32 am »

TBIII is what I use with no problem. I have used urac 185 and it works, easier to grab the TBIII for me, unless I'm splicing billets

I know others have good luck with epoxies etc.
Tracy

Primitive Archer