« previous next »
Pages: [1]

Author Topic: Fire Hardening?  (Read 3113 times)

0 Members and 1 Guest are viewing this topic.

Offline Zach Roberts

  • Member
  • Posts: 58
Fire Hardening?
« on: July 02, 2009, 11:34:16 pm »
 Could someone please show/tell me the way to fire harden a spear or something of thAt nature?
Logged
"If you ain't first...you're last"

"If you're not living on the edge,You're takin up to much space"

Offline TreyNC

  • Member
  • Posts: 121
Re: Fire Hardening?
« Reply #1 on: July 03, 2009, 01:38:59 pm »
you can push the end to be hardened into the ground just below a fire. turn it slowly. should come out looking light golden brown (white wood). for billets and such I have thrown them in the edge of a fire and let them burn a little. I have been thinking of using my gas grill, but haven't done it yet.

Trey
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Fire Hardening?
« Reply #2 on: July 05, 2009, 07:59:14 pm »
The way I see it, fire hardening is not an exact science.  Some wood will respond well and get harder but some wood will become brittle as well.  You've got to experiment.

Basically just hold the wood close to a heat source and "toast" it a little.

In any case, I think fire hardening is over rated. JMO
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr
Pages: [1]
« previous next »