« previous next »
Pages: [1]

Author Topic: Stave sealing question  (Read 2019 times)

0 Members and 1 Guest are viewing this topic.

bearbowman

  • Guest
Stave sealing question
« on: April 13, 2009, 02:56:54 pm »
I aquired some ash. I split it and got 5 usable staves out of it. I don't have time to do much with them right now. I have them stored in my garage off of the ground. I sealed the ends and backs with titebond II.

Is this a good way to store/ season them?
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: Stave sealing question
« Reply #1 on: April 13, 2009, 03:21:42 pm »
yup,are they laying flat or standing?
i would lay them flat,that way the rh is equal down the length of the stave and it should dry evenly
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

bearbowman

  • Guest
Re: Stave sealing question
« Reply #2 on: April 13, 2009, 03:35:38 pm »
Yes they are laying acoss saw horses with the back facing up.
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Stave sealing question
« Reply #3 on: April 13, 2009, 04:29:42 pm »
TB works for sealing, but so does cheapo Elmer's glue or spray shellac-much cheaper than TBIII.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Aosda

  • Guest
Re: Stave sealing question
« Reply #4 on: April 13, 2009, 11:38:45 pm »
Watch the unsupported center of the staves.  As with any lumber, you may develope a sag.  More work straightening later.  Good luck with the Ash.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Stave sealing question
« Reply #5 on: April 14, 2009, 05:50:25 am »
Sounds good to me,that should be OK. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Dean Marlow

  • Member
  • Posts: 531
Re: Stave sealing question
« Reply #6 on: April 14, 2009, 12:20:35 pm »
If you are going to leave the bark on Ash you better spray them with some kind of insecticide. Worms will eat it up if you don't. Dean
Logged
Pages: [1]
« previous next »