Author Topic: best way to de grease osage for bamboo backing?  (Read 2078 times)

0 Members and 1 Guest are viewing this topic.

Offline yazoo

  • Member
  • Posts: 485
best way to de grease osage for bamboo backing?
« on: April 03, 2009, 10:33:27 pm »
what are your thoughts?
if you can shoot over them , they ain't to far

Offline sailordad

  • Member
  • Posts: 5,045
Re: best way to de grease osage for bamboo backing?
« Reply #1 on: April 03, 2009, 10:36:39 pm »
never done that yet,but i would use acetone
only cause i just bought a gallon of new stuff ;D
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: best way to de grease osage for bamboo backing?
« Reply #2 on: April 03, 2009, 10:36:51 pm »
I have only used Acetone or Red Devil Lye....both seem to work just fine....and one even darkens the wood nicely for you too!!
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,581
Re: best way to de grease osage for bamboo backing?
« Reply #3 on: April 04, 2009, 12:45:17 am »
I have used acetone and denatured alcohol. Some folks say a good sanding and brushing off the dust is enough. I haven't tried that yet.
  Depending on what backing you are using and what glue. For sinew or rawhide, lye(wood ash & water) or Dawn dish soap work well. I like a wet cleaner for these so the wood is slightly hydrated and will accept the hide glue better.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC