« previous next »
Pages: [1]

Author Topic: first time splicing billets  (Read 3352 times)

0 Members and 1 Guest are viewing this topic.

Offline wvbowhntr

  • Member
  • Posts: 129
first time splicing billets
« on: March 21, 2009, 11:21:42 pm »
can a bow spliced at the handle from billets bend in the handle?
Logged
As for me and my house we will serve The Lord.  Greg in WV

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: first time splicing billets
« Reply #1 on: March 21, 2009, 11:43:53 pm »
NO! with a possible exception but NO!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: first time splicing billets
« Reply #2 on: March 21, 2009, 11:58:43 pm »
                                                                       Only ONCE.............. ;D
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Eric Krewson

  • Member
  • Posts: 5,412
Re: first time splicing billets
« Reply #3 on: March 22, 2009, 10:12:51 am »
I have done it with urac, simi bendy handle, no problem.
Logged

Offline Jmilbrandt

  • Member
  • Posts: 363
Re: first time splicing billets
« Reply #4 on: March 22, 2009, 04:49:10 pm »
I have one bow that bends slighty at the handle that was spliced. I used epoxy and it bends very slightly.
Logged
SW Utah
Pages: [1]
« previous next »