« previous next »
Pages: [1] 2

Author Topic: Best finish for ipe?  (Read 12788 times)

0 Members and 1 Guest are viewing this topic.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Best finish for ipe?
« on: March 16, 2009, 08:33:45 am »
I just finished up an ipe bow-first time I've used this wood. Seems like I vaguely remember somebody saying that Tru-oil doesn't work well with ipe, or am I just imagining it? Would I be better off with Tru-oil or spray spar urethane?
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Tom B

  • Guest
Re: Best finish for ipe?
« Reply #1 on: March 16, 2009, 09:36:15 am »
Hi steve. I am really liking teak oil for a finish,though i haven't tried it on ipe.it is thinner than tru oil and is for dense oily woods tom
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Best finish for ipe?
« Reply #2 on: March 16, 2009, 10:01:17 am »
Steve, you can use shellac first then put down any finish you wish.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DanaM

  • Member
  • Posts: 9,211
Re: Best finish for ipe?
« Reply #3 on: March 16, 2009, 10:12:43 am »
I think it was Jesse that didn't have good luck with tru oil, said it didn't dry and same with oil based varnish.
I believe he use a water based finish on the two ipe/ boo bows he just posted.
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Timo

  • Member
  • Posts: 2,026
Re: Best finish for ipe?
« Reply #4 on: March 16, 2009, 06:16:25 pm »
Put on a good layer of super glue,let it dry, and sand it off. Then try the truoil.

I use t-bird and have never found a wood that it wouldn't cover.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Best finish for ipe?
« Reply #5 on: March 16, 2009, 06:20:43 pm »
Tung oil has worked well for me.  I haven't tried any other finish (on ipe), though.  The shellac spit coat is a good idea....I might try that myself.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Best finish for ipe?
« Reply #6 on: March 16, 2009, 06:23:13 pm »
Thanks, guys.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline sailordad

  • Member
  • Posts: 5,045
Re: Best finish for ipe?
« Reply #7 on: March 16, 2009, 06:38:42 pm »
tongue oil for me also,i hand rub in the first few light coats,usually dries in a few hours.
then the last 2 coats i leave a little heavier and dont rub in and it leaves a beautiful finish,to shiny for most folks when they hunt.
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

nickf

  • Guest
Re: Best finish for ipe?
« Reply #8 on: March 16, 2009, 07:08:05 pm »
I used linseed oil, wich I applied with 600grit sandpaper, it worked really well for me!

Nick
Logged

whitewoodshunter

  • Guest
Re: Best finish for ipe?
« Reply #9 on: March 16, 2009, 09:36:46 pm »
Mini wax wipe on poly!!!!
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Best finish for ipe?
« Reply #10 on: March 16, 2009, 09:42:29 pm »
Ive used just spar urethane and depending on the ipe sometimes it can take literally 3 weeks for the first coat to dry. If you use shellac first make sure its wax free shellac. On the last bow I made I used wax free shellac one coat then water based spar urethane / varathane. Seems to be holding up great and I was able to finish it in one day.
I had problems with tru oil but I may have applied it to thick.
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

whitewoodshunter

  • Guest
Re: Best finish for ipe?
« Reply #11 on: March 16, 2009, 10:41:11 pm »
The wipe on poly takes about 8-10 hours to dry.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Best finish for ipe?
« Reply #12 on: March 16, 2009, 10:54:27 pm »
 David Knight can set you up. I think he uses laquer sanding primer then sprays on laquer finish after that. I wipe it down with acetone first. The wood is so oily, it doesn't need much more than a good waxing. Is that the stave I gave you? lets see some pictures.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline adb

  • Member
  • Posts: 5,339
Re: Best finish for ipe?
« Reply #13 on: March 17, 2009, 12:07:28 am »
I prefer the wipe on poly myself, in a satin finish.
Logged

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: Best finish for ipe?
« Reply #14 on: March 17, 2009, 02:10:32 am »
Jesse has the wright Idea!! wipe on poly wont dry somtimes for weeks!! sanding sealer then poly is the way I go about it..
Logged
Pages: [1] 2
« previous next »