Author Topic: Boo backing, Solvent for glue? (Read 2158 times)

Colt45 · « **on:** March 15, 2009, 04:01:54 pm »

I just glued my bamboo backing onto my juniper and now I realized that I did not have enough clamps and this isn't going to work

Can I soak it in water or something to get the glue off so I can save these pieces? Thanks!

Pat B · « **Reply #1 on:** March 15, 2009, 04:20:39 pm »

What glue did you use? If Tite-Bond glue, you can heat the bow up to 150deg(F) and the glue will release. If Urac, you are stuck(

) with it.
I wouldn't think that juniper would be strong enough in compression for a boo backing.

Colt45 · « **Reply #2 on:** March 15, 2009, 04:23:18 pm »

okay i will try that =) thank you!!!

whitewoodshunter · « **Reply #3 on:** March 15, 2009, 04:50:32 pm »

If you clue the backing on again use strips of inner tubes and wrap them tightly around the the bow starting from the grip to the tips.

sailordad · « **Reply #4 on:** March 15, 2009, 08:40:06 pm »

overlap the inner tube as you wrap also

Jmilbrandt · « **Reply #5 on:** March 15, 2009, 08:43:06 pm »

how perfect does this have to be? I mean if there is like 1/32" glue filled gap in spots is that alright? 1/16"?

Colt45 · « **Reply #6 on:** March 15, 2009, 08:45:58 pm »

^^^^^^^^^^^^^^^^^^^^^^^ That was me

haha sorry I was logged in as my brother on accident...

Primitive Archer