« previous next »
Pages: [1]

Author Topic: Titebond sheer strength?  (Read 2841 times)

0 Members and 1 Guest are viewing this topic.

Offline Kegan

  • Member
  • Posts: 2,676
Titebond sheer strength?
« on: March 11, 2009, 05:05:53 pm »
Could TBII hold up for a wood or boo backed R/D bow? Would it depend on weight?

Usually I see them done with epoxies, so I figured that TB simply wasn't stronge nough for that sort of design? I've used it on straight bows without issue, but I've never done a R/D glue up?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Titebond sheer strength?
« Reply #1 on: March 11, 2009, 06:27:44 pm »
I used TBIII on the last 2 or 3 boo backed bows and they are still shooting.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

nickf

  • Guest
Re: Titebond sheer strength?
« Reply #2 on: March 11, 2009, 07:16:39 pm »
I used tb3 for both bbi's I made, and for the other 2 glueups. No failure yet.
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Titebond sheer strength?
« Reply #3 on: March 11, 2009, 07:29:17 pm »
So it holds up with R/D glue-ups too? Glad to hear that :).
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Titebond sheer strength?
« Reply #4 on: March 11, 2009, 08:21:18 pm »
Mine were all Perry reflexed
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Catahoula

  • Member
  • Posts: 222
Re: Titebond sheer strength?
« Reply #5 on: March 11, 2009, 10:18:48 pm »
Hi,

I a glue comparison in Fine Woodworking TightBond III beat them all...the tests included stressing joints in doors and such and waterproof qualities.  I have an osage/boo bow down to the tillering stage and so far so good.  If it blows up I be glad to let post that fact and switch to the other stuff!  Have an ipe/boo bow waiting for the results of the osage/boo...will admit I don't know squat but gotta start somewhere!:-)

Rand
Logged
“You only live once, but if you do it right, once is enough.”― Mae West

Offline stiknstring

  • Member
  • Posts: 376
Re: Titebond sheer strength?
« Reply #6 on: March 12, 2009, 12:39:46 am »
I have an boo backed ipe bow with three inches of net reflex and she pulls close to 80 pounds right now.....absolutely sound and solid
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Titebond sheer strength?
« Reply #7 on: March 12, 2009, 05:22:01 pm »
Titebond III seems to be a safe bet then ;D

How about TB II?
Logged

Rich Saffold

  • Guest
Re: Titebond sheer strength?
« Reply #8 on: March 12, 2009, 06:37:47 pm »
Kegan, I'd use the tb2  on light bows, that being said they are usually sold next to each other in what ever store you are in.. There is a difference....
Trust me ;)

Rich

Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Titebond sheer strength?
« Reply #9 on: March 12, 2009, 07:10:03 pm »
Quote from: Rich Saffold on March 12, 2009, 06:37:47 pm
Kegan, I'd use the tb2  on light bows, that being said they are usually sold next to each other in what ever store you are in.. There is a difference....
Trust me ;)

Rich



The one local place doesn't have it. From waht I've heard there seems to be a big difference. Now I know so- thanks eveyrone :)!
Logged

Far East Archer

  • Guest
Re: Titebond sheer strength?
« Reply #10 on: March 13, 2009, 12:19:35 am »
Titebond creeps, meaning it slides some tiny %. I notice it in such area as fades on tri-laminated bows.
Though, no failure from that, it just does not look good when it happens....

Dont worry about it strength though, one of the strongest glues out there.
Strongest is probably hideglue, which doesnt creep. I have a pot that has curled in from the glue pulling the sides as it dried!
Logged
Pages: [1]
« previous next »