« previous next »
Pages: [1]

Author Topic: New bow, requesting a few tips  (Read 1949 times)

0 Members and 1 Guest are viewing this topic.

Offline Kitsu

  • Member
  • Posts: 198
  • Räven bakom masken
New bow, requesting a few tips
« on: February 26, 2009, 03:23:20 pm »
i have a shape roughed out and ive just been gradually sanding it time to time when i get bored, i have had it as a rough tiller for a while now, it is maple and i am almost sure that it has been seasoned/dried by now, any clue when is too early or too late?
Logged
"If you open your mind for me
You won't rely on open eyes to see
The walls you build within come tumbling down
And a new world will begin" ----- Queensryche, "Silent Lucidity

R.H , Southeastern PA/Western PA.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: New bow, requesting a few tips
« Reply #1 on: February 26, 2009, 04:18:36 pm »
You should be able to tell by the resilience of the wood. Floor tiller it and see if the limbs spring back, if they feel crisp and if it has a ring to it when you thump it. How long has it been in the state it is in? More than a few months and it is ready or at least close.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

nickf

  • Guest
Re: New bow, requesting a few tips
« Reply #2 on: February 26, 2009, 06:36:28 pm »
with a rough tiller, drying shouldn't take much longer than 2 weeks.

best option is to weight it. if it looses less than 3grams/day, it's more or less dried, and ready for final tillering.

Nick
Logged
Pages: [1]
« previous next »