« previous next »
Pages: [1]

Author Topic: Removing finsih to redo a bow  (Read 2757 times)

0 Members and 1 Guest are viewing this topic.

Offline Kegan

  • Member
  • Posts: 2,676
Removing finsih to redo a bow
« on: February 19, 2009, 05:44:09 pm »
I want to fix a bow up, but it's got three coats of spar urethane on it. It's backed with cotton.

What can I do to remove it, orrrrrr should I just remove wood from where it needs remove and refinish the spots that become exposed?
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Removing finsih to redo a bow
« Reply #1 on: February 19, 2009, 08:43:13 pm »
Ive removed finish with acetone but not sure if it was spar urethane. I know it will take off lacquer fast. 
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Removing finsih to redo a bow
« Reply #2 on: February 19, 2009, 09:41:52 pm »
Any time I removed a finish.  I started out with light scraping to get the bulk of the finish off.  Then sand to get the remainder off, and finally wipe with some acetone to get any leftover oils off.
Logged
Traverse City, MI

Offline Lost Arra

  • Member
  • Posts: 121
Re: Removing finsih to redo a bow
« Reply #3 on: February 19, 2009, 11:44:53 pm »
I've done plan B.  Remove only what needs to be redone and go from there.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Removing finsih to redo a bow
« Reply #4 on: February 20, 2009, 12:54:55 am »
With Tru-Oil I have done like Rick mentioned.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Removing finsih to redo a bow
« Reply #5 on: February 20, 2009, 07:57:56 am »
I also do it like Rick.Just be easy and you won't hurt the back. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Removing finsih to redo a bow
« Reply #6 on: February 20, 2009, 08:34:45 am »
Rick's process sounds like a good approach to me... :)
Logged
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Kegan

  • Member
  • Posts: 2,676
Re: Removing finsih to redo a bow
« Reply #7 on: February 20, 2009, 09:24:12 am »
Thanks guys :). I'm still "planning my attack". Most of the bow is in fine order, except for the tips and a little belly work. Rest would be superficial. I'll see if we have some acetone, if not I'll try a test on a scrap to see if subsequent coats of spar urethane on top of old coats next to uncovered wood shows up as a hideous, splotchy mess.
Logged

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Removing finsih to redo a bow
« Reply #8 on: February 20, 2009, 08:24:48 pm »
Kegan
If you do "spot fix" the finish make sure you scuff any of the old finish before applying a new finish over it.  Just sand it lightly with 220 or a scotch pad.  This will help the new finish adhere to the old finish.
Logged
Traverse City, MI

Offline Kegan

  • Member
  • Posts: 2,676
Re: Removing finsih to redo a bow
« Reply #9 on: February 21, 2009, 10:58:53 am »
Thanks :). I got it piked, redid the handle, heated the limbs into a R/D shape, and got new overlays and handle leather build-up on. The finish isn't giving me as much toruble (I removed most, up to the backing) as the darn overlays :-X!
Logged
Pages: [1]
« previous next »