« previous next »
Pages: [1]

Author Topic: twisted sister(not the 80's hair band)  (Read 5031 times)

0 Members and 1 Guest are viewing this topic.

Offline sailordad

  • Member
  • Posts: 5,045
twisted sister(not the 80's hair band)
« on: February 10, 2009, 11:13:29 pm »
    well this is the second of two hick board bows that i am making right now,the other is all but finished and is looking good and gets shot in tomorrow.

now this is its sister,it like its sister is 72" ttt pyramid style.it also has a cotton camo cloth backing.
now i ahve this one pulling 16" and noticed that one limb is twisiting.i did notice that one side was thicker than the other,so i reduced the thicker side.
excrsized the hell out of it,and still the twis t is there.
there is no longer any noticable differance in thicknes from one side of the limb to the other.
so what can i do to remove the twist?
heres a pic



thanks for any input

                                                                                      peace,
                                                                                            tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Jesse

  • Member
  • Posts: 2,129
Re: twisted sister(not the 80's hair band)
« Reply #1 on: February 10, 2009, 11:28:30 pm »
Im no expert but I would say you need to remove wood from the opposite side its twisting towards. I think it might end up thinner on that side but maybe it needs to be. Maybe you could also file the string groove a bit to put more pressure on the other side ???
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

AKAPK

  • Guest
Re: twisted sister(not the 80's hair band)
« Reply #2 on: February 11, 2009, 01:44:31 am »
Ive had hickory do that and removing the wood worked a little, them growth rings are hard to judge if there twisted naturally inside,so I piked the one that did that to me and got a 50# 66" that was straight. Good Luck :)
Logged

Offline bambule

  • Member
  • Posts: 212
Re: twisted sister(not the 80's hair band)
« Reply #3 on: February 11, 2009, 07:16:37 am »
Leave it as it is - just a little twist that doesn't effect the bow - most of my bows are a little twisty - i don't care  ;D

Greetz
Cord
Logged
Niedersachsen, Germany

Offline DanaM

  • Member
  • Posts: 9,211
Re: twisted sister(not the 80's hair band)
« Reply #4 on: February 11, 2009, 07:18:49 am »
Yup don't worry about as long as the full draw isn't affected :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline TRACY

  • Member
  • Posts: 4,523
Re: twisted sister(not the 80's hair band)
« Reply #5 on: February 11, 2009, 09:31:18 am »
IMO, propellar isn't a deal breaker, leave it.

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline sailordad

  • Member
  • Posts: 5,045
Re: twisted sister(not the 80's hair band)
« Reply #6 on: February 11, 2009, 11:14:21 am »
well my biggest concer is that this isnt a natural prop twist.
the board was flat and straight when i started.the twist didnt show up untill i braced it.
i have made about 4 bows that had natural prop twist,didnt worry about them.
i am convinced this twist is due to tiller.this bow and its sister are going to br gifted to some young adults.
i would like and need it to turn out as i promised to make them 2 bows,and i dont have another hick board available.

so i would like to fix it if possible.i dont want them to get hurt becuase of my bad craftsmanship :-[

thanks                                                       peace,
                                                                       tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline armymedic.2

  • Member
  • Posts: 331
Re: twisted sister(not the 80's hair band)
« Reply #7 on: February 11, 2009, 12:47:59 pm »
i would leave it, my favorite hick bow has a bad prop and shoots great.   lets see the camo back!
Logged
Some say freedom is free, well i have to disagree-
some say freedom is won, by the barrel of a gun.

Offline adb

  • Member
  • Posts: 5,339
Re: twisted sister(not the 80's hair band)
« Reply #8 on: February 11, 2009, 02:14:19 pm »
I've experienced the same thing with hickory and maple. I started with dead flat material, and ended up with slight prop twist on one limb tip. I tried pretty much everything, including heat correction, and I couldn't get rid of it completely. As long as it doesn't get too much worse at full draw, I'd just leave it. I know it looks crappy, but it doesn't really affect how the bow shoots, at least not in my case.
Logged

Offline sulphur

  • Member
  • Posts: 321
Re: twisted sister(not the 80's hair band)
« Reply #9 on: February 11, 2009, 10:23:40 pm »
why so long???  going for someone with a 32" draw?
Logged

Offline robbsbass

  • Member
  • Posts: 260
Re: twisted sister(not the 80's hair band)
« Reply #10 on: February 13, 2009, 03:40:56 pm »
I really don't know if I should voice an opinion here,but, Hasn't a few of you used a heat gun to heat the limbs and then take the twist out. Again I'm asking, because more of us novices might run into the same problem and want to try to straighten the limbs. If so what would be the proper procedure in doing this.

             Robb
Logged
live each day the best you can
Pages: [1]
« previous next »