« previous next »
Pages: [1]

Author Topic: Straightening cedar shafts  (Read 4740 times)

0 Members and 1 Guest are viewing this topic.

Offline swimbill

  • Member
  • Posts: 79
Straightening cedar shafts
« on: February 05, 2009, 01:41:06 pm »
Hi I  just received a lot of cedar shafts, some are very good others not so straight.  What is the best method for straightening out cedar shafts.
Logged

gutpile

  • Guest
Re: Straightening cedar shafts
« Reply #1 on: February 05, 2009, 01:47:17 pm »
sometimes you can just hand straighten..bend where it needs and hold for a second...might have to heat them a tad ..just don't overheat...gut
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Straightening cedar shafts
« Reply #2 on: February 05, 2009, 05:46:16 pm »
What Gut said!
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Straightening cedar shafts
« Reply #3 on: February 06, 2009, 09:43:19 am »
One of those little hooks like you screw into the wall works pretty good, just screw it into a wooden handle, put it over the shaft, and rub it on the outside of the bend while you'r putting a little pressure on it.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Straightening cedar shafts
« Reply #4 on: February 06, 2009, 10:50:08 am »
I made a tool like Hillbilly suggested and here is a pic of how it is used.   
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Straightening cedar shafts
« Reply #5 on: February 14, 2009, 01:35:13 pm »
Hi,  POC is usually easy to straighten and hand straightening works best for me.  For those few shafts that require more I like the 'ACE' brand compression straightener.  3R has them.   The "'ACE' works well on more difficult woods like ash as well.  Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

whitewoodshunter

  • Guest
Re: Straightening cedar shafts
« Reply #6 on: February 14, 2009, 01:45:17 pm »
Pat B. : ( Not to interrupt this thread) but will those kind of straightening tools with work with cane and bamboo without heat?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Straightening cedar shafts
« Reply #7 on: February 14, 2009, 01:56:51 pm »
You will need heat to get them straight initally but this tool will help if they get a little out of straightness between the nodes.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Scowler

  • Member
  • Posts: 611
Re: Straightening cedar shafts
« Reply #8 on: February 19, 2009, 11:42:48 am »
I use the Shaft Tamer from 3Rivers and a solid flat surface (counter top). 
Logged

coyote pup

  • Guest
Re: Straightening cedar shafts
« Reply #9 on: February 19, 2009, 12:51:58 pm »
PatB, is that bamboo in your pic with the tool?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Straightening cedar shafts
« Reply #10 on: February 19, 2009, 01:54:56 pm »
Yes, Pup! It is a native bamboo(Arundaneria appalachiana) aka hill cane.     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »