Author Topic: help with rawhide backing (Read 3518 times)

ravenbeak · « **on:** February 08, 2009, 11:22:20 pm »

I've got a great little bow on the go, 50" long and tillered to 25. I'm gonna do a rawhide backing and I have already got the strips cut out. I will be using hide glue.

Which side should go against the wood, hair or flesh. I was thinking hair as it is smoother and then sand down the flesh side,

what do you guys do?

thanks in advance.

Jamie

Pat B · « **Reply #1 on:** February 08, 2009, 11:25:21 pm »

I always put it down the way it came off the animal, flesh side down.

El Destructo · « **Reply #2 on:** February 08, 2009, 11:48:08 pm »

Flesh Side Down....if you want ....and I do.....sand it before you put it down to make sure that the part being glued is flat

Gordon · « **Reply #3 on:** February 09, 2009, 12:00:24 am »

Flesh side down because it tends to curl that way.

Pappy · « **Reply #4 on:** February 09, 2009, 01:05:32 pm »

I always do flesh side down also.

Pappy

ravenbeak · « **Reply #5 on:** February 09, 2009, 01:37:16 pm »

consensus says flesh side down,

thanks guys

ricktrojanowski · « **Reply #6 on:** February 09, 2009, 09:35:55 pm »

I have only rawhide backed one bow. I used Titebond 3 instead of hide glue the TB 3 is waterproof and did flesh side down.

Pappy · « **Reply #7 on:** February 10, 2009, 05:54:55 am »

I use TB3 also.Never done rawhide with hide glue.

Pappy

adb · « **Reply #8 on:** February 10, 2009, 06:47:12 pm »

I've used TB2 and hide glue for rawhide backings, and I've always put it flesh side down.

Primitive Archer