« previous next »
Pages: [1]

Author Topic: black walnut  (Read 3944 times)

0 Members and 1 Guest are viewing this topic.

Offline sailordad

  • Member
  • Posts: 5,045
black walnut
« on: February 07, 2009, 01:33:17 pm »
       well i managed to get my hands on a piece of black walnut,not a lot just a part of a limb that was growing down towards the ground.
the owner wanted it gone and so i volunteered to remove it for free ;D >:D

now its not huge,but has some real dar dark heartwood. i have heard that you can use either sapwood or heartwood or a combo.
being that this limb sint huge i was wondering what whoudl be the best way to cure and optimize the use of the wood.this piece is 8ft long pretty much knot free,kinda snakey.also have another piece that has a lot of knots,was going to use for other projects.
should i split it in half or remove all sap wood and keep heartwood whole?
hers a pic



as always   thanks for the input

                                                                                     peace,
                                                                                            tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline DanaM

  • Member
  • Posts: 9,211
Re: black walnut
« Reply #1 on: February 07, 2009, 01:51:37 pm »
For now I would split it in half, this will tell you if the grain is straight and it will aid in drying, make sure to seal the ends good.

If the rings are thick enough I would remove most of the sap wood and go for a two tone bow, not because ya have to
just think it would look cool 8)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: black walnut
« Reply #2 on: February 07, 2009, 03:19:04 pm »
What Dana said.  I have made a few BW bows. One was sapwood with a little heart in the handle and the other was a hickory backed heartwood. A combo of both with look good and the sapwood would probably be a good backing for the heartwood.  Because of the diameter, if you do split it in half you will only get heartwood in the handle, I believe.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: black walnut
« Reply #3 on: February 07, 2009, 03:41:40 pm »
Tim the last one I made from a Limb of Black Walnut I got from my Friend John in Tennessee....I just took a power planer and took the bellyside down to the Heartwood....and thats as far as I went....sealed it all....and let her dry good....it never split or checked at all....and I ended up with Limbs that were both Sap and Heartwood.....looked great too.....this may not have been the right thing to do.....but it worked for me.....
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: black walnut
« Reply #4 on: February 07, 2009, 04:38:42 pm »
not me, I am all about the heart wood. plenty of great woods to make bows form out there, not as many that are as pretty as the heartwood of BW. i would sacrifice getting 2 bows for one beautiful heartwood bow, and from my experiences, heart wood has been much better, but perhaps that was my design or specific tree. -Ryan
Logged
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline Stoker

  • Member
  • Posts: 1,729
Re: black walnut
« Reply #5 on: February 07, 2009, 08:14:33 pm »
I would take my chance with one nice bow rather then spliting in two. It looks like a piece of chokecherry I've been saving for ayear or so I'm going to use as much hardwood as possible than sinue. It looks like a nice piece good luck with it. I thought only us canuaks had the metified tapes? Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

nickf

  • Guest
Re: black walnut
« Reply #6 on: February 08, 2009, 06:12:48 am »
I would try to split/saw, then use the split/sawn surface as back, so you get most of the heartwood in the bow. Since black walnut isn't very tension strong, it's a smart choice to decrown it, and I think the way I described gives the most wood.

it's gonna look awesome with the heartwood running through the limbs, with the sides being covered by a little sapwood...

It's a gorgeous stave, and I'm drop-dead jealous! ;)

goodluck!
Logged

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: black walnut
« Reply #7 on: February 08, 2009, 01:54:38 pm »
There is a good looking bow in there.Good luck.(Seal them ends)  Frank
Logged
Frank (The Sparrow) Pataha, Washington
Pages: [1]
« previous next »