« previous next »
Pages: [1]

Author Topic: Good Pic of tradepoint  (Read 2443 times)

0 Members and 1 Guest are viewing this topic.

Offline broken arrow

  • Member
  • Posts: 68
Good Pic of tradepoint
« on: February 05, 2009, 10:52:11 pm »
The steel must have been relatively soft

i'm impressed the shafting didn't damage

[attachment deleted by admin]
Logged

Offline ballista

  • Member
  • Posts: 327
  • freedom isnt free
Re: Good Pic of tradepoint
« Reply #1 on: February 05, 2009, 11:47:41 pm »
 wow- thats incredible the shaft didnt crack- is the steel hand forged? from the pic it looks lke the aluminum you can buy at hardware stores, but it also is too thick- haha, what exactally were you shooting, steel breastplates? very nice head though, and out of cutiousity, is the material you used to attach it on there sinew or leather scraps? they looked like leather, was unsure but its a good theory. -jimmy
Logged
Walk slowly, with a big stick. -Ted Rosevelt.

Offline broken arrow

  • Member
  • Posts: 68
Re: Good Pic of tradepoint
« Reply #2 on: February 06, 2009, 11:34:50 am »
The steel was .050" 4130 but it must have been annealed.

that was from hitting a rock, buried within the sand of the target.

that is sinew holding it on.   
Logged

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Good Pic of tradepoint
« Reply #3 on: February 06, 2009, 11:47:04 am »
That's not to thick .Personally I don't think there is such a thing as to thick ,to thin sure.

That would be 18 guage steel ,not bad .I like heavy points .mine are about 210 grains ,I use 16 guage .0703 steel .

Nice point ,heck heat treat it and remount it.

Ralph
Logged
Pages: [1]
« previous next »