« previous next »
Pages: [1] 2

Author Topic: Hickory backed Ipe-Elb  (Read 12843 times)

0 Members and 1 Guest are viewing this topic.

Offline Cooper

  • Member
  • Posts: 169
  • "I believe in … surprise"
Hickory backed Ipe-Elb
« on: February 01, 2009, 07:48:01 pm »
Ipe with Hickorybacking
Lower "english-longbow-cross-section".
Glued without any reflex - a straight and simple design.

Tips from Goncalo alves (Tigerwood, Astronium fraxinifolium / Astronium fraxinifacium)
Arrow pass from Tagua-Nut.

Length NtN 179cm - 70 1/2''
Width in the middle 2,9cm - 1 9/64''
Width at the tips Tips 1cm - 25/64''
55 lb / 27''

I hope you like this bow …   :)

[attachment deleted by admin]
« Last Edit: February 24, 2009, 06:00:04 pm by Cooper »
Logged
Niels Böttcher - "Cooper" (PA) = "Botjer" (FC+FA)
"If this day wasn't your friend it was your teacher …"

__________________
Hamburg, Germany

Offline Runningbear

  • Member
  • Posts: 15
Re: Hickory backed Ipe-Elb
« Reply #1 on: February 01, 2009, 08:06:25 pm »
Wow! that it super!
Logged

salad days

  • Guest
Re: Hickory backed Ipe-Elb
« Reply #2 on: February 01, 2009, 08:13:03 pm »
Nice job! I like that grip and I haven't seen one done that way before. Very good looking bow.
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: Hickory backed Ipe-Elb
« Reply #3 on: February 01, 2009, 08:19:48 pm »
That looks like a very good shooter to me. Very nice!
Logged
Gordon

Offline islandpiper

  • Member
  • Posts: 635
  • "Just one more bow, OK?"
Re: Hickory backed Ipe-Elb
« Reply #4 on: February 01, 2009, 10:54:51 pm »
OK, that is by far the PRETTIEST tiller i have seen here yet.  Those curves are just "sexy", no other way to say it.  Nice work overall, great handle and tip facings.  At this length I am guessing it pulls and shoots smooth.  I think many of us are striving to make bows like this. 

Tell us what glue you applied the Hickory with?  Thickness of the backing?  Thickness of the bow near the fades and at the tips before the facings? 

How much has it been shot?  Length of arrows? 

thanks for sharing your work with us.  Piper
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: Hickory backed Ipe-Elb
« Reply #5 on: February 01, 2009, 11:27:55 pm »
Beautiful bow, been staying away from reflex a lot more myself lately, I love the way they shoot. Steve
Logged

Offline brownhillboy

  • Member
  • Posts: 577
Re: Hickory backed Ipe-Elb
« Reply #6 on: February 01, 2009, 11:30:39 pm »
Very nice bow!  As the others said, perfect tiller and I like the way you did the handle.  Looks great.
Logged
south central VA

Offline Jesse

  • Member
  • Posts: 2,129
Re: Hickory backed Ipe-Elb
« Reply #7 on: February 02, 2009, 12:34:13 am »
 Thats a Beauty. I really like the looks of that one.
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline adb

  • Member
  • Posts: 5,339
Re: Hickory backed Ipe-Elb
« Reply #8 on: February 02, 2009, 12:43:57 am »
Very well done, sir!!!
Logged

Badbill

  • Guest
Re: Hickory backed Ipe-Elb
« Reply #9 on: February 02, 2009, 01:25:57 am »
Nice bow! The handle is very cool.
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Hickory backed Ipe-Elb
« Reply #10 on: February 02, 2009, 04:35:49 am »

very nice tiller, very nice details!

frank
Logged
Frank from Germany...

Offline Cooper

  • Member
  • Posts: 169
  • "I believe in … surprise"
Re: Hickory backed Ipe-Elb
« Reply #11 on: February 02, 2009, 05:56:46 am »
Thank you all very much for your friendly comments.
I think I'm going red 

To answer a few questions:

The glue I used is Bindan Propellerleim, a german one. I think it corresponds to your Tidebond III.

The thickness of the backing is 15/64'' (6mm) over the whole length. This is one thing I would change, if I would repeat it -  thinner hickorybacking (about 4mm).
Or a bamboobacking and a little perry-reflex, if your hunting after higher performance.

The thickness of the bow near the fades is 3/4'' (19mm) and 7/16'' (11mm) at the tips.

Me and two friends shot the bow several times during the final stage of the tillering, including cloud shooting - I guess it is shot about 300 times altogether.

The length of my arrows is about 31 1/2'' (80cm) (My personally draw-length is about 27'' but I prefer a little longer arrows. I have no special arrows for every bow, but several sets of arrows with different spine. And most of the time I uses bamboo-arrows. The spine isn't as importend as the weight if using bamboo.)
Logged
Niels Böttcher - "Cooper" (PA) = "Botjer" (FC+FA)
"If this day wasn't your friend it was your teacher …"

__________________
Hamburg, Germany

Offline Keenan

  • Member
  • Posts: 4,824
Re: Hickory backed Ipe-Elb
« Reply #12 on: February 02, 2009, 06:38:19 am »
Very nice bow. I love the color contrast and the detail work on the tips is great. The handle wrap really makes that a very fine looking bow. Congratulations.   Keenan
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Hickory backed Ipe-Elb
« Reply #13 on: February 02, 2009, 07:02:02 am »
Beautiful bow,very well tillered and the finish work is exceptional.Well done.  :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Hickory backed Ipe-Elb
« Reply #14 on: February 02, 2009, 12:22:36 pm »
You rule on the handle on this one 8). Not to mention the fine wood craft everywhere else. This will be quite the entry for February Laminate Bows of the Month.
Logged
When you're retired, every day is Saturday
Pages: [1] 2
« previous next »