« previous next »
Pages: [1]

Author Topic: "Bear" Grease finish question.  (Read 7182 times)

0 Members and 1 Guest are viewing this topic.

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
"Bear" Grease finish question.
« on: January 11, 2009, 09:41:41 pm »
I am attempting a few primitive arrows and want to do a bear grease finish.  Problem is I'm fresh out of bear fat. ;).  Do I just rub in some lard for the finish or is there more to it than that?
Logged
Traverse City, MI

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: "Bear" Grease finish question.
« Reply #1 on: January 12, 2009, 12:38:54 am »
I used bear grease for a finish on the yew bow I hunted with this year. All I did was hand rubbed it and the friction of that heated it up. You could also start with warm shafts so it will penetrate better. If you are not tying on your fletching you will want to fletch first or the glue may not stick.
   I use pine pitch varnish on primitive arrows. Just dissolve pine pitch in denatured alcohol(or Shannon's mouth oil), strain it through some cloth and it is ready to use. You will want to start with hard, dry pitch.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: "Bear" Grease finish question.
« Reply #2 on: January 12, 2009, 06:34:22 am »
I like the pitch varnish idea.  I think I'll give that a go.
Logged
Traverse City, MI

Offline huntertrapper

  • Member
  • Posts: 1,708
Re: "Bear" Grease finish question.
« Reply #3 on: January 12, 2009, 11:22:09 pm »
yes! i use lard works well and the smell of bacon goes away after a bit. the water beads off the wood. coated couple of my bows with it too.
Logged
Modern Day Tramp

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: "Bear" Grease finish question.
« Reply #4 on: January 13, 2009, 08:52:20 am »
I use bear grease on primitive arrows, I do it like Pat-warm it up, rub in several coats over a period of time. Most grease finishes are an ongoing thing instead of a one-shot deal.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: "Bear" Grease finish question.
« Reply #5 on: January 13, 2009, 01:49:26 pm »
I got a jar of bear grease (in a trade) and it's still sittin' there.....maybe some day I'll open it.  I'm afraid it might spoil.  Maybe I'll wait until I have 1000 arrows waiting to be finished at the same time. ::)
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: "Bear" Grease finish question.
« Reply #6 on: January 15, 2009, 11:45:45 pm »
Patrick,  I was keeping my bear grease in the basement frig(with all the other good stuff) for a while but for the last month or so its been sitting out. I haven't notices and rancid smell from it at all.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: "Bear" Grease finish question.
« Reply #7 on: January 16, 2009, 01:13:14 pm »
Hmmm...thanks Pat...that makes me feel better.  That jar of bear grease is looking pretty good now.... :)
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: "Bear" Grease finish question.
« Reply #8 on: January 16, 2009, 06:49:29 pm »
Patrick...if the Grease was rendered down properly...you should have no Problems with it sitting ...as long as it is cool....you know what I mean since you live in Texas also!! I keep mine in the Pantry in the House.....I covered the Jars that I am not using with Parafin Wax to seal them....the other is just sitting there with a piece of Press and Seal on it...two years old and still smells like the Day it was rendered...you can do the same with Pork Fat...as long as it is rendered down properly and separated
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: "Bear" Grease finish question.
« Reply #9 on: January 16, 2009, 07:39:13 pm »
Sounds good Destructo.  Thanks.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: "Bear" Grease finish question.
« Reply #10 on: January 18, 2009, 11:08:01 am »
Yeah, I keep it in the fridge, lasts a long, long time.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
Pages: [1]
« previous next »