« previous next »
Pages: 1 [2]

Author Topic: Three hacksaw blades  (Read 11440 times)

0 Members and 1 Guest are viewing this topic.

Offline Okie

  • Member
  • Posts: 601
    • Bear Creek Selfbows
Re: Three hacksaw blades
« Reply #15 on: January 14, 2009, 12:15:17 pm »
Another vote for the tile saw. That's the best I've found.
Logged
Take a kid huntin' (If not who'll drag your deer out when you get old)
<---------<<<Founding Member Oklahoma Selfbow Society>>>-----------> Vice President OSS

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Three hacksaw blades
« Reply #16 on: January 14, 2009, 01:48:16 pm »
 I've used the 1" belt sander like shooter, also. I use that tile saw for abrading notches when I'm knapping.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline stiknstring

  • Member
  • Posts: 376
Re: Three hacksaw blades
« Reply #17 on: January 14, 2009, 02:09:34 pm »
Tile saw here as well....in fact I think I learned that little trick by reading some past threads on the subject.
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Three hacksaw blades
« Reply #18 on: January 14, 2009, 02:39:54 pm »
Sounds like I'll have to look into getting myself a tile saw then :)
Logged

Offline stiknstring

  • Member
  • Posts: 376
Re: Three hacksaw blades
« Reply #19 on: January 14, 2009, 04:29:59 pm »
You will like it Kegan...the blades are cheap too if I remember.
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Three hacksaw blades
« Reply #20 on: January 14, 2009, 08:17:48 pm »
Quote from: stiknstring on January 14, 2009, 04:29:59 pm
You will like it Kegan...the blades are cheap too if I remember.

Cheap? I will like it ;D!

I did a test on a scrap piece of dowel with three blades ound together. I'll have to get used to it (I'm used to handles) but it's fast and simple. Hopefully I'll be able to get a tile saw, or get used to this.

Thanks everyone :).

I KNEW I'd be kicking myself :D!
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Three hacksaw blades
« Reply #21 on: January 15, 2009, 10:10:34 pm »
Here's how I do  it. See "Selfnocks". jawge
http://georgeandjoni.home.comcast.net/~georgeandjoni/
Logged
Set Happens!
If you ain't breakin' you ain't makin!

jeatonx4

  • Guest
Re: Three hacksaw blades
« Reply #22 on: January 16, 2009, 08:59:40 am »
They make a blade for a sawzall and for that has the same texture as those tile hacksaw blades.  It won't bend like the others and takes up very little room in my quiver.
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Three hacksaw blades
« Reply #23 on: January 16, 2009, 07:01:54 pm »
I was looking around our shop for a block of wood to prop the tip of a bow I was straightenning when I came acorss another hacksaw. I looked at the small prongs and they were much, much longer than the one I'd tried previously. In a few moments it was working perfectly.

Thanks everyone, you've all been a great help :)!
Logged

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Three hacksaw blades
« Reply #24 on: January 17, 2009, 02:07:48 am »
Kegan,  I use a hack saw and three blades.  It works well for me.   One suggestion though.  I used to find tate sooner or later some saw dust would work ts way between the blades and then the cut would wander as the blades spread apart.  I put some epoxy glue between the blades before I mount them in the saw.  Nice smooth cuts and easy to finish up with a little sandpaper.    Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline Kegan

  • Member
  • Posts: 2,676
Re: Three hacksaw blades
« Reply #25 on: January 17, 2009, 08:49:38 pm »
Quote from: M-P on January 17, 2009, 02:07:48 am
Kegan,  I use a hack saw and three blades.  It works well for me.   One suggestion though.  I used to find tate sooner or later some saw dust would work ts way between the blades and then the cut would wander as the blades spread apart.  I put some epoxy glue between the blades before I mount them in the saw.  Nice smooth cuts and easy to finish up with a little sandpaper.    Ron

I noticed that one blade , due to the angle of the progns, was jsut a bit looser than the others. However, being my father's saw and blades, I felt it inappropriate to glue them up in such a permanent fashion. Instead I take a moment to check them, and use a bit of ductape to old them in place during the cut.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Three hacksaw blades
« Reply #26 on: January 19, 2009, 12:53:19 am »
Here are a few tools I use for making arrows. I made an osage handle for my tile saw blade...but I still prefer a single bandsaw cut then open it up with a knife, files and sand paper. ;D

[attachment deleted by admin]
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Kegan

  • Member
  • Posts: 2,676
Re: Three hacksaw blades
« Reply #27 on: January 19, 2009, 07:06:40 pm »
Very cool stuff Pat :)!
Logged

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Three hacksaw blades
« Reply #28 on: January 19, 2009, 09:35:27 pm »
Pat-  Is the smaller darker wooden tool with the elongated hole for straightening?  And what is the longer lighter colored wood tool with the non elongated hole for?
Logged
Traverse City, MI
Pages: 1 [2]
« previous next »